FS98 Timer gauge with Clock, Stopwatch, Simspeed, Zoom
and Zulu Time - reworked - now the timezone problem is fixed.
For Flight Simulator 98, by Christian Koegler the Gauge Master
--------------------------------------------------------------
July 11, 1998
Visit my homepage at:
http://www.fortunecity.com/underworld/pandemonium/535 for the
latest FS98 gauges.
Or visit http://www.virtual.icom-web.com
Home of Original Freeware Panels for FS98 for the latest
gauges.
Installation instructions toward bottom.
Copyright information at the bottom.
Send feedback or comments to:
Christian Koegler
chriskoe@teleweb.at
Member of the Freeware Panel Designer Association
___________________________________________________
DESCRIPTION
Reprogrammed EXTRA-Timer with a Stopwatch.
You can toggle between the Stopwatch, the
Simspeed and the Zoomfactor on the lower
display, and you can toggle between local
and zulu time on the upper display.
If you click on ST/SP you start the stopwatch.
If you click on ST/SP again you stop the stopwatch.
If click on RST you reset the stopwatch.
If you click on the lower MODE button you can set
the Simulation Speed.
Display: SR-1.00
If you click again on the lower MODE button you can
set the Zoom factor.
Display: ZM-1.00
If you click once again on the lower MODE button you
are back in the stopwatch mode.
Display: 00:00:00
If you click on the upper MODE button you can change
to zulu time. You can see now a yellow indicator point
left of the upper display.
If you click again on the upper MODE button you can
change back to local time, and the yellow indicator
poit disappears.
You can change the time like in the original gauges.
For the change of the simulation speed and the zoom
factor, please take a look at the enclosed HotSpot
picture.
___________________________________________________
CONDITIONS OF USE
These gauges are FREEWARE. They may ONLY be used by panel
designers that release FREEWARE panels.
Panel designers are welcome to modify the bmp's as they desire
using Chuck Dome's panel utility or any other utility.
timer.gau this is the Gauge
screenshots.bmp this are some Screenshots of the gauge
hotspot.bmp hotspots for the use of this gauge
File_id.diz short discription of the gauge
readme.txt you know....
Installing this gauge:
If you want to replace the original EXTRA Timer Gauge,
please rename your EXTRA-300.TIMER.GAU, which is located
in the FS98/GAUGES directory, to EXTRA-300.TIMER.ORI, so that
you have a backup of the original gauge. When ever you want to
use the original gauge again, rename the EXTRA-300.TIMER.ORI
file back to EXTRA-300.TIMER.GAU, and you can use the original
one. Now copy the file Timer.gau in your FS98/GAUGES directory,
and rename it to EXTRA-300.TIMER.GAU, now you can use the new
gauge instead of the original one. You do not need to make any
modifications to your panel.cfg files in this case.
When you want to use this new Timer gauge instead of any other
Timer gauges, you have to edit your panel.cfg files. You can find an
example of - how to add a new gauge to my panel - on my homepage.
If you have already the previous TIMER gauge installed, you need only
to copy the new TIMER.GAU file over the old one.
Alexander Lawrence
He gives me his full support to use his WebSite, and
also he is a great inspiration for me.
Andreas Jaros
Together with Andi I am working on a A340 panel. There
will be some very special, highly realistic gauges in
this panel. I hope that we can release it very soon.
Thanks for the CLICK and for the BIMM sound Andy.
Eric Ernst
You can find many of my gauges in his panels. He was also
a very great inspiration for my work. I hope that Eric is
back very soon.
Konstantin Prokopiu
For his great efforts to program gauges with sounds. Without
his work we could not release such realistic gauges.
Hiroyoko Toyohara
For his great gauges; take a look at his very realistic
Boeing 777 panel. You can see there what is possible in FS98.
Olav Magne Rønningen
The newest member of the FPDA. Take a look at his Boeing 737
panel. Now he is working on a great DC-8 panel.
Chuck Dome
For his GAU2BMP and GAUMOD98 utilities that makes the
gauge modification much easier. Many thanks for your great
utilities!
Benjamin Chen
For his great GaugeBrowser that makes the gauge modification
much easier for everybody.
Microsoft Corporation
Thanks for the Panel SDK that has been an invaluable resource
to make better gauges.
DO NOT MAKE ANY MONEY WITH ANY GAUGES!
DO NOT USE ANY IMAGES FROM THIS GAUGES
IN ANY SORT OF PAYWARE PRODUCTS!!!
DO NOT UPLOAD THIS FILE TO ANY SERVER OR SITE THAT
REQUIRES A FEE FOR ACCESS.
DO NOT DISTRIBUTE THIS FILE ON ANY "FOR PROFIT" CD-ROMS.
DO NOT USE THE GAUGES WITHOUT PRIOR PERMISSION OF THE AUTHOR.
THIS GAUGES ARE FREEWARE. NO MODIFICATION FOR DISTRIBUTION
WITHOUT EXPRESS PERMISSION OF AUTHOR. DO NOT MAKE
MONEY WITH THIS GAUGES ! PLEASE ASK THE AUTHOR FOR PERMISSION
IF YOU WANT TO USE ANY COMPONENTS OF THIS ZIP TO AVOID COPYRIGHT
INFRINGEMENT!
NOTHING IN THESE FILES WILL HARM YOUR COMPUTER AND I
ACCEPT NO LIABILITY.
________________________________________________________
